Ricoh UC5 Operator's Manual page 14

The UC 5 drivers will now be installed. Some of the files used by the driver are
stored on the Windows 3.11 installation disks, as a result you may be prompted to
insert some of these disks during the installation process.
Once the driver has been installed the UC 5 will be listed in the Printers dialogue
box. By default Windows installs the driver on LPT1:. The port can be changed
by clicking on the "Connect" button and specifying an alternative.
Before continuing to use the UC 5 follow the final instructions on setting up the
default options for the UC 5 settings.
Click on "Setup" to set the default options for the UC 5 driver. (These settings can
be overridden by settings made in the "Print - Setup.." dialogue boxes within ap-
plication programs.)
Choose settings which will be most commonly used with your Digital Duplicator.
Click the "OK" button when done.
14