Menu Settings; Rinsing; Descale; Install Filter - DeLonghi ECAM28.46X Instructions For Use Manual

• release the main switch at the side of the appliance (fig.
2).
Important!
Never press the main switch while the appliance is on.

MENU SETTINGS

When you access the programming menu by pressing the
MENU/ESC button, the following menu items are available:

Rinsing

Use this function to deliver hot water from the spout to heat
the internal circuit and make the coffee delivered hotter.
To enable the function, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the HOT MILK or LATTE button (fig. 8) until "Rins-
ing" is displayed;
3. Press the button. The message "Confirm?" is dis-
played;
4. Press the (fig. 3): after a few seconds, hot water
flows out of the spout, heating the internal circuit and ma-
king the coffee delivered hotter.
Please note!
Press any button to stop hot water delivery at any time.

Descale

For instructions on descaling, see page 17.

Install filter

For instructions on how to install the filter, see the section
"Installing the filter (page 18).

Replacing the filter

For instructions on how to replace the filter, see the section
"Replacing the filter" (page 19).

Adjust time

To adjust the time on the display, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the HOT MILK or LATTE button (fig. 8) until "Adjust
time" is displayed;
3. Press the button (fig. 3);
4. Press the HOT MILK or LATTE button (fig. 8) to change
the hours;
5. Press the button to confirm;
6. Press the HOT MILK or LATTE button (fig. 8) to change
the minutes;
7. Press the button to confirm.
This sets the time. Press the MENU/ESC button to exit the
menu.

Auto-start

You can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coffee immediately.
Please note!
To enable this function, the time must already have been set
correctly.
To enable Auto-on, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the HOT MILK or LATTE button (fig. 8) until "Au-
to-start" is displayed;
3. Press the
4. Press the
5. Press the HOT MILK or LATTE button to choose the hours;
6. Press the
7. Press the HOT MILK or LATTE button (fig. 8) to change
the minutes;
8. Press the
9. Press the MENU/ESC button to exit the menu.
Once the time has been confirmed, enabling of auto-start is in-
dicated by the symbol displayed alongside the time and
under the Auto-start item in the menu.
To disable the function:
1. Select auto-start from the menu;
2. Press the
3. Press the
The symbol is no longer displayed.

Auto-Off

The time can be changed so that the appliance switches off
after 15 or 30 minutes, or after 1, 2 or 3 hours.
To re-programme Auto-off, proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the HOT MILK or LATTE button (fig. 8) until "Au-
to-off" is displayed;
3. Press the
4. Press the HOT MILK or LATTE button (fig. 8) until the de-
sired operation time is displayed (15 or 30 minutes, or 1, 2
or 3 hours);
5. Press the
6. Press the MENU/ESC button to exit the menu.
Auto-off is programmed.

Cup warmer

This function enables or disables the cup warmer.
Proceed as follows:
1. Press the MENU/ESC button to enter the menu;
2. Press the HOT MILK or LATTE button (fig. 8) until "Cup
warmer" appears on the display;
10
button. "Enable?" is displayed;
button to confirm;
button to confirm;
button to confirm;
button. "Disable?" is displayed;
button to confirm.
button;
button to confirm;