VTech GIGAPHONE User Manual page 30

Announced Transfer:
You can perform an announced transfer (call and advise another extension) of
an active call by doing the following steps:
• Handset or Base must be on an active call.
• Place the active call on HOLD.
• Press the INTERCOM key followed by the number of the Handset (1,2,
3,4) or Base (0) that you wish to transfer the call to.
• When the other extension answers the intercom call, explain they have an
active call waiting.
• Both extensions press OFF to end the intercom call.
• The other extension presses ON, HANDSFREE, or SPEAKERPHONE to
pick up the call on hold.
Quick Memory Keys on Base
The GIGAPHONE Base unit has three Quick Memory keys that can be
programmed with three frequently dialed numbers.
To program Quick Memory:
• The phone must be OFF.
• Press and hold the Quick Memory key which you want to program (M1,
M2 or M3) until you hear a beep.
• Enter the number you want to store. Be sure to include long distance codes
if necessary.
• Press the same Quick Memory key again to store the number. You will
hear a confirmation beep.
To delete a number from Quick Memory:
• The phone must be OFF.
• Press and hold the Quick Memory key which you want to delete (M1, M2
or M3) until you hear a beep.
• Press the same Quick Memory key again to delete the number. You will
hear a confirmation beep.
To dial using Quick Memory:
• Simply press the appropriate Quick Memory key. The GIGAPHONE will
automatically enter Speakerphone mode, access dialtone and then dial the
programmed number.
Handset and Base Operation
30