VTech GIGAPHONE User Manual page 19

Use this option to register a Handset to the GIGAPHONE Base. You can register
a total of four Handsets to the GIGAPHONE Base. This process is activated
automatically whenever a new handset is powered up in range of the
GIGAPHONE Base.
You will be prompted to enter the 15-digit Base ID code printed on the underside
of the base unit. After entering this code, press OK. The Handset will display
SEARCHING FOR BASE, and then FOUND BASE when the process is
complete.
Note: Base ID codes are 15 digits long and can include the following characters
: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, , or # .
*
19
Register