Choke Cable Inspection; Circuit Breaker - Polaris 2003 Genesis i Owner's Safety And Maintenance Manual

MAINTENANCE AND LUBRICATION

Choke Cable Inspection

Pull the choke knob to make sure the choke
cable is operating smoothly.
When the knob is pulled out (2), the choke
valve is fully closed (the choke is
1
on); when the knob is in (1), the
valve is fully open (the choke is
off).
There should be minimal choke
2
cable slack. If the choke is not
functioning properly, have it
serviced by your authorized Polaris dealer.

Circuit Breaker

The electrical system is protected
with a 15 amp circuit breaker.
A
NOTE: DI models have two 15
amp circuit breakers. To reset the
circuit breaker, locate and push the
reset buttons (A) on top of the
A
electrical box.
Fuses
OR
Carb Models
The MFI is protected by a 1/4
amp fuse (B) and the bilge
pump is protected by a 3 amp
fuse (C).
C
Inspect the fuses every season
to ensure fuses are not blown.
B
There are spare fuses in the
electrical box.
DI Models
The MFI is protected by a 2
amp fuse and the bilge pump
is protected by a 3 amp fuse.
NOTE: DI models may have two 15 amp in-line fuses (located on the
chassis harness) in place of the circuit breakers.
89