Pre-Operation Check; Service And Maintenance; Jet Pump Water Intake Safety - Polaris 2003 Genesis i Owner's Safety And Maintenance Manual

SAFETY
Operator Safety

Pre-Operation Check

Always perform the pre-operation check (beginning on page 42) before
starting and riding the watercraft. Make sure all critical components are
operating correctly. Check fuel and oil levels and all controls,
especially the throttle lever, handlebars, and steering nozzle. Failure of
these critical components can result in an accident and lead to severe
injury or death.

Service and Maintenance

Routine service and adjustments to the watercraft are critical for the
safe operation and extended life of the watercraft. Follow the
maintenance and service recommendations outlined in this manual.

Jet Pump Water Intake Safety

Contact with the jet pump or driveline components of the watercraft
can result in severe injury, death or drowning. Do not allow hands,
feet, ropes, straps, clothing or long hair to come in contact with the jet
pump water intake (1) on the bottom of the watercraft while the engine
is running.
Never insert any object into the intake or outlet (2) of the jet pump, and
never start or operate the watercraft with the inlet grate, ride plate (3),
or any guards or shields removed.
To prevent serious injury due to accidental starter engagement, be sure the
engine is off and the safety lanyard is disconnected before removing
weeds or debris that may have collected in or around the jet pump intake.
3
9
2
20