Polaris 2003 Genesis i Owner's Safety And Maintenance Manual page 45

Pre-Operation Inspection
Item
Fuel/water separator
(carb models)
Fuel/oil tank levels
Jet pump water intake Inspect and remove debris if present; be
Throttle
Steering
Fire extinguisher
Storage compartment
Engine Cover
Battery
Hull
Drain plugs/bilge
Loose parts/hoses
Seat
Loose ropes/straps/
clothing/long hair
Riding gear
Switches/buttons
Lanyard cord/stop
switch
Reverse System
Bilge
Visually inspect for water and drain if present
Check fuel/oil; add as necessary; visually
inspect for presence of water
sure intake grate is secure; push rear of wa-
tercraft up and down in the water to flush
sand out of water intake before starting
Check for proper operation.
Check for proper operation; visually inspect
control cable
Inspect condition and expiration date
Check for secure latching
Check for secure latching
Check fluid level and condition; vent hose
must be clear and open
Inspect hull for damage or cracks; clean off
marine growth
Inspect and clean; it should not leak; be sure
it is tight and secure
Inspect for loose parts/hoses and connec-
tions
Check that seat is securely fastened
Be sure that there are no loose ropes,
straps, clothing, etc.;
Long hair is tied back and secured
Check operator and passenger for complete
gear and proper fit
Check operation
Check condition and operation
Check operation
Pump out any water (button on switch pad)
OPERATION
What To Do
43