Before you fit the plug into the wall socket, check the
following points :
1) That the supply voltage of the domestic wiring system
does not fluctuate by more that 10%, plus or minus, from 220
- 230 V.
2) That the meter, the fuses, the supply line and the wall
socket are suitable to carry the maximum load required by the
machine (2,3 kW).
This appliance complies with the following EC Directive :
- 72/23/EEC of 19.02.1973 - Low-Voltage Directive
- 89/336/EEC of 03.05.1989 (including Amentment Directive
92/31/EEC) - EMV Directive.
Very important :
The washing machine is provided with a feeding wire
with earth connection: it must be connected to a tap like
tat is provided with a good earth connection.
The manufacturer declines any responsibility where the
previous recommendations are not followed.
The replacing of the power cord must only be realized by
the After Sales Service.
Note : the rating plate is fixed on the back of the appliance.
Carefully level the machine
adjusting the levelling feet located
at the front of the base and then
tighten the lock nuts at the top of