Brookstone iConvert User Manual page 14

Save thIS Image
Press or
message will appear on the screen to indicate when the photo is saved .
note: Saved scanned images are saved into the Scanned Image folder on
the frame. the saved file will be named with a 4-digit number, with Scan as
a prefix which runs from 0001 to 9999. For example, scan_0001.jpg. When
the counter reaches 9999 it simply starts over from 0001 again. restoring the
unit to default does not reset this counter (see page 34—Factory default)
cancel/Scan a neW photo
To erase the image you just scanned and scan a new photo, press
highlight cancel/Scan a new photo, then press
will be erased, and the unit will be ready to scan the next photo .
13
to highlight Save this Image, then press
to save . A status
Image showing the
photo being saved
is in progress .
or
. The previously scanned photo
to