Brookstone iConvert User Manual page 13

ScannIng a photo
1 . Power on the unit .
Press the Scan button to enable the scan function .
2 .
3 . Adjust the Paper Feed Guide on the scanner to the size of your photo .
4 . Insert the picture in the Protective Sleeve (if needed) face up and push it
forward into the Photo Feed Slot until the picture is automatically pulled in
and scanned .
5 . Do not press any buttons or touch photo while the scanning is in progress . Wait
until the process is complete .
note: this scanner supports photo sizes from 1.5" x 2" to 4" x 6". do not
insert photos smaller than 1.5" x 2" without using the photo protectIve
Sleeve or larger than 4" x 6". the quality of the scanned image may vary due
to bright light.
Scanner menu
Once the scan process is completed, a
scanner menu will appear on the screen
(see below) . Press
desired choice .
rotate
To rotate the scanned photo, press
The scanned photo will be rotated . Each time the
rotate by 90° clockwise .
or to select your
or
to highlight rotate, then press
is pressed, the photo will
.
12