Table of Contents
Advertisement
User Manual
Installation
Please follow the instructions below on how to install the USB 2.0 AutoSwitch PRO for each of
your computers
Windows PC
The following steps will allow you to install the software required to use the auto-switching
functionality. If you only want to use the AutoSwitch as a manual USB switch, please skip to
point 6.
1. Insert the supplied CD into your computers CD-ROM drive
2. An Autorun screen will pop up on your computers screen
3. Click Next. If you want to install the software in the default location displayed click Next
again. Alternatively click Change... to choose a new directory, then click Ok, followed by
Next to continue.
4. Click Install to begin the installation
5. When the installation has completed click Finish.
6. Now connect the AutoSwitch to the first computer using a USB A to B cable.
7. The computer will then automatically complete a short installation.
3
English
Advertisement
Table of Contents
