Technical Information; Product Maintenance - Chauvet Intimidator Barrel LED 300 User Manual

5. T
ECHNICAL
Product
Maintenance
Page 16 of 18
I
NFORMATION
Dust build-up reduces light output performance and can cause overheating. This can
lead to reduction of the light source's life and mechanical wear. To maintain optimum
performance and minimize wear, you should clean your lighting products at least twice a
month. However, be aware that usage and environmental conditions could be
contributing factors to increase the cleaning frequency.
To clean the product, follow the instructions below:
•
Unplug the product from power.
•
Wait until the product is cold.
•
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external surface/vents and reachable internal components.
•
Clean all external optics and glass/transparent surfaces with a mild soap solution,
ammonia-free glass cleaner, or isopropyl alcohol.
•
Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
•
Softly drag any dirt or grime to the outside edges of the external optics or
glass/transparent surface.
•
Gently polish the external optics and glass/transparent surfaces until they are free of
haze and lint.
•
When cleaning units with one or more movable mirrors, you should keep the contact
with the mirror's surface to a minimum to avoid scratching or damaging it.
Always dry the external optics and glass/transparent surfaces carefully after
cleaning them.
Intimidator™ Barrel LED 300 User Manual (Rev. 5)