In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Manual Conventions CHAUVET® manuals use the following conventions to differentiate certain types of information from the regular text. EANING...
Never disconnect the power cord by pulling or tugging on the cord. • Never carry the fixture directly from the cord. Always use the hanging/mounting bracket. • Avoid direct eye exposure to the light source while it is on. Page 4 of 17 Intimidator Scan LED 300 User Manual (Rev. 3)
Product Overview Safety Bracket Adjustment Knob Voltage Selection Switch (115/230 VAC) DMX In Power In DMX Out Power Out Fuseholder Page 6 of 17 Intimidator Scan LED 300 User Manual (Rev. 3)
Additional power link out The power linking shown in this document is for the CHAUVET® North American version ONLY! Therefore, it is the customer’s responsibility to check with the Dealer/Distributor regarding power linking on the local version of the product. Connections and availability may change, depending on the power requirements and/or regulations of each country/region.
When the product is in the sitting position (using the four rubber feet), the product must be secured so that it is stable and safe from falling down. Page 8 of 17 Intimidator Scan LED 300 User Manual (Rev. 3)
DMX channels configurations (personalities), please consider the total DMX channels when selecting a DMX address. The Intimidator™ Scan LED 300 fixture uses 8 or 11 DMX channels, depending on the selected DMX configuration (personality). Page 9 of 17 Intimidator Scan LED 300 User Manual (Rev. 3)
Press <MODE/ESC> until one of the standalone modes appears on the LED screen (SLAv, NStS, NAFA, NASL). Using <UP> and <DOWN>, select NAFA. Press <ENTER>. <FASt> will appear on the screen. Page 10 of 17 Intimidator Scan LED 300 User Manual (Rev. 3)
<DOWN> to move on to the next digit. Press <ENTER>. This mode will be automatically terminated after 10 seconds of being idol. Page 11 of 17 Intimidator Scan LED 300 User Manual (Rev. 3)
Keep DMX cables separated from Interference from AC wires power cables or black lights. If you still have a problem after trying the above solutions, please contact CHAUVET® Technical Support. Page 14 of 17 Intimidator Scan LED 300 User Manual (Rev. 3)
Package must be clearly labeled with a Return Merchandize Authorization Number (RMA #). Products returned without the RMA # will be refused. Call CHAUVET® and request an RMA # prior to shipping the fixture. Be prepared to provide the model number, serial number and a brief description of the cause for the return.
ECHNICAL PECIFICATIONS WEIGHT & DIMENSIONS Length ......................11 in (279 mm) Width ........................ 10 in (254 mm) Height ......................18.9 in (478 mm) Weight ......................14.7 lbs (6.7 kg) GOBO SIZE Outside ........................23.8 mm Inside ......................... 20.9 mm Thickness (max)......................2 mm MOVEMENT RANGE Pan ............................
ONTACT W o r l d W i d e General Information CHAUVET® 5200 NW 108 Sunrise, FL 33351 voice: 954.929.1115 fax: 954.929.5560 toll free: 800.762.1084 Technical Support CHAUVET® 5200 NW 108 Sunrise, FL 33351 voice: 954.929.1115 (Press 4) fax: 954.929.5560 (Attention: Service)