Operation; Control Panel Operation; Menu Map; Configuration (Dmx) - Chauvet Intimidator Barrel LED 300 User Manual

4. O
PERATION
Control Panel

Operation

Menu Map

Configuration
(DMX)
DMX
Personalities
and Starting
Address
Page 10 of 18
To access the control panel functions, use the four buttons located underneath the
display. See the Product Overview
Button
Press to find an operation mode or to back out of the current menu
<MENU>
option
<UP> Press to scroll up the list of options or to find a higher value
<DOWN> Press to scroll down the list of options or to find a lower value
<ENTER> Press to activate a menu option or a selected value
Mode Programming Steps
DMX Address
SLAv (Son)
NStS (SrUn)
Operation
Modes
NAFA (FASt)
NASl (SLoU)
Normal Pan
Pan
Inverse Pan
Normal
Display
Display
Inverse
Display
11-Channel
Mode
Channel Mode
8-Channel
Mode
Reset
Load
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
The Intimidator™ Barrel LED 300 has two DMX personalities, from an 8 channel mode for
basic control to an 11-channel mode with more advanced control over the lights.
The Intimidator™ Barrel LED 300 uses up to 11 DMX channels in its highest DMX mode,
which defines the highest configurable address to 502.
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product's channels.
If you are not familiar with the DMX protocol, download the DMX Primer from
www.chauvetlighting.com.
To select the DMX personality, do the following:
1. Press <MENU> repeatedly until 8-CH or 11CH shows on the display.
2. Press <ENTER> to choose your DMX personality when it appears on the display.
To then choose your starting address:
1. Press <MENU> repeatedly until d001 shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER>.
to see the button locations on the control panel.
Function
Description
001-512 Sets the DMX starting address
Slave operating mode
Sound-Active mode
Automatic mode, fast program
Automatic mode, slow program
PAn Normal Pan operation
rPAn Inverse Pan operation
Dis
Change the LED display text position
rDis
11CH
Selects the DMX personality
8CH
rESt Resets product
LoAd Load factory defaults
Intimidator™ Barrel LED 300 User Manual (Rev. 5)