Electrolux Tumble dryer Instruction Book page 5

Description of the appliance
13. Connector for drain hose
There is a drain hose as an extra accessory
for you who want and can connect the tumble-
dryer directly to a drain outlet. Fix the hose to
the connector (13) after releasing the hose
clip and removing the plug. When a drain
hose is fitted, the water tank will not be filled
with water.
14. Water tank for condensed water
This fills up with the water condensed by the
dryer and should be emptied after each load.
When the tank is full, a warning light (D) will
come on and a buzzer will sound. The dryer
will stop automatically and will not restart
until the tank has been emptied. If the dryer
should stop on account of a full tank during
an automatic program and you fail to empty
the tank within 5 minutes, the program may
not be able to continue successfully. If this
happens, the current program will need to be
cancelled and a new one started. For this
reason it is best always to check that the tank
is empty before starting to dry a new load.
Lights
(see also page 9).
A. Lit during drying stage.
B. Lit during cool-down stage.
C. Flash alternately during anticrease stage.
D. Flashes when water tank is full.
Buttons
E. Start button. After selecting program, press
and hold the start button until one of the
indicator lights comes on (1-2 seconds).
F. Button for reduced heat for timed programs.
If this button is pressed, the drying heat will
be reduced and the load will dry at a lower
temperature. Suitable for especially delicate
textiles.
Program selector
G. For selecting electronic or timed drying
programs (see also page 8).
Cancel program
H. If the program selector is turned to this
position during a program, the program will
be cancelled and a different program can
then be selected. To start the new program,
press the start button.
11
3
E
B
A
G
- 5 -
12
13
F
C
D
H