CONTENTS Instructions for the user Instructions for the installer Warnings Advice for safety Technical Features Installation Description of the appliance Specification nozzles Use of the appliance Advice for use Maintenance and clening What to do if the appliance does not work Guarantee conditions How to read the instruction book ?
WARNINGS It is very important that this instruction book An intensive and prolonged use of the should be kept safety for future consultation. cooker could necessitate a supplementary If it should be sold or given to another airing by opening the window, or a more person, please ensure that the booklet goes effective ventilation...
• Do not leave anything (cloths, aluminium foil, etc.) on the hob when using the Installation burners, • Always clean the cover before closing, • The work of installation must be carried • When the oven is in use the cover has to out by a qualified installer.
TECHNICAL FEATURES Free standing Classe 1 Cover Enamelled Pan support Enamelled Front right Auxiliary 1,0kW Back right Rapid 2,6kW Front left Rapid 2,6kW Back left Semirapid 2,0kW Oven Oven Over burner power 3,2 kW Grill Grill burner power (only for the 2,5 kW model ZC5500G) Oven grate - nickled steel...
BURNER BURNER BURNER BURNER BURNER CONTROL CONTROL CONTROL CONTROL CONTROL KNOB KNOB KNOB KNOB KNOB Model : ZC 5500 G OVEN ZC 5500 G IGNITION SWITCH OVEN OVEN/GRILL FRONT LEFT BACK RIGHT BACK LEFT FRONT RIGHT BURNER BURNER BURNER BURNER...
USE OF THE APPLIANCE 1. GAS OVEN Before the first use ensure that the room is well ventilated: V.M.C. (Mechanic ventilation) or opened window How to proceed ? 1. Lift the lid 2. Remove the oven accessories 3. Detach the adhesive labels, the foil protection if there is 4.
The symbol on the knob corresponds to the symbol on the control panel. Maximum level Minimum level Grill function only for the model ZC5500G (heat come from the top burner only). Ignition 1. Open the oven door. 2. Lift the small lid on the bottom of the cavity, push and turn the control knob to the left to position maximum (fig.
Grill (only for the model ZC5500G) When using the grill it has to be supervised, the oven door opened the protective screen “A” in its place. Heat comes from the top of the oven. It is suitable for grilling meat (beef bacon, pork bacon …) that remains tender, for toast or to brown already cooked.
2. THE HOB BURNERS The knobs for using the gas cooker are found on the control panel. The regulation knobs should be turned in anticlockwise direction until the small flame symbol, and vice-versa for the larger symbol. To the symbol on the knob corresponds a symbol on the control panel.
How to chose the burner Above every knob there is a symbol for the corresponding burner. Good use For better cooking results, always chose pans which properly fit to the diameter of the burner used (fig. 9). We advise to lower the flame as soon as the liquid starts boiling.
ADVICE FOR USE Oven cooking Influence of the pots on oven cooking • Turn off your oven 5 minutes before the results foreseen cooking time you will save power, the accumulated heat will allow You have to know that: to end cooking; •...
MAINTENANCE AND CLEANING Before cleaning, check that the knobs are on “off” position, that the appliance has cooled completely and that it is disconnected. Never use abrasive powder or wire sponge for cleaning the appliance. Burners Clean the covers with warm water and mild detergent, remove all crust.
Oven Enamelled parts: Same cleaning as other enamelled parts. Oven door cleaning For a complete cleaning of the oven door it is advisable to dismantle as follows: -open the door completely (fig. 12) -turn the two blocking parts on the hinges arms 60º.
WHAT TO DO IF THE APPLIANCE DOES NOT WORK If the appliance does not work properly, check the following points before asking for service; there could be simple problems that you could remedy by yourself; if not, contact your after sales service.
GUARANTEE CONDITIONS abnominal power variation, etc., or non- Guarantee stipulated in the contract 1 year starting from setting into function the observing of the installation and use manufacturer will replace the damaged conditions stipulated in the Instruction book, wrong handling, negligence parts except the cases mentioned in chapter wrong, installation non-conforming to the...
INSTRUCTIONS FOR THE INSTALLER ADVICE FOR SAFETY Electric connection • Before installation ensure that the local Check that: distribution conditions (LPG • supplying lines good pressure) and the pre-setting of the conditions; appliance are consistent; • the diameter of the cables complies with •...
INSTALLATION Placement Remove the plastic packaging and install the cooker in a dry, ventilated room (fig. 15) not near curtains, paper, alcohol, petrol, etc…) The appliance has to be set on a heatproof soil. This appliance belongs to class “1” in matters of protection against overheating of surrounding surfaces.
Connection using a rigid pipe or a flexible pipe (class 1). Fitting 1. For network gas: Flexible, nonmetal pipe Connection • Use a flexible rubber pipe non longer than 1,5 m and inner diameter of 15 mm mounted with its holder •...
Electrical connection Important Any electrical work required install this hob should be carried out by a qualified electrician or competent person, in accordance with the current regulations. power THIS COOKER MUST BE EARTHED. cord The manufacturer declines any connection of flexible hose liability should these safety measures not be observed.
NOTE: The earth wire should be about 2 cm longer than the live and neutral wires. Important If the supply cord is damaged it must be replaced by the manufactuer or its service agent or a similarly qualified person in order to avoid a hazard. Before connecting check that: •...
CHANGE OF GAS Your cooker is foreseen to work with natural gas, propane or butane. It is not foreseen for butane or propane air. For changing the gas type it is necessary to: • replace the nozzles (hob); • adjust the minimum level; •...