Zanussi ZC 5500 Instruction Book page 8

The symbol on the knob corresponds to
the symbol on the control panel.
Off
Maximum level
Minimum level
Grill function only for the model
ZC5500G (heat come from the top burner
only).
Ignition
1. Open the oven door.
2. Lift the small lid on the bottom of the
cavity, push and turn the control knob
to the left to position maximum (fig. 1),
maintain it pressed even after bringing
near the flame (fig. 2 for the model
ZC5500 and fig. 3 for the model
ZC5500G),
3. Release the knob after 10 seconds
and check that the burner is ignited
through the holes in the bottom lid.
If for any reason the flame should
extinguish turn down the relevant knob and
re-ignit it only after 1 minute at least.
4. Close the oven door
5. Preheat the oven for 10 min. on
maximum setting, than turn the knob to the
desired position.
Do not place cookware or foil
directly on the oven base
Extinguishing of oven burner
Turn the knob clockwise to mark «
safety device is in place.
7
.
». The
fig. 1
fig. 2
fig. 3