Installation Diagram - Hellenbrand 7,156,995 Owner's Manual

Installation diagram

figure 1
When installing an Iron Curtain Filter system it is common to provide filtered only water to some fixtures such as the kitchen cold
faucet. This is typically done as a matter of personal preference. On rare occassions, the customer may experience some air in
the filtered water line the morning after regeneration. It has proven beneficial to plumb the line for the filtered only water fixture in
a downward direction from the inlet of the softener (12 inches recommended), then make a reverse turn and go upward toward the
fixture. Any accumulated air always rises to the highest point in a water system and cannot naturally flow downward.
Inlet check Valve
Iron Curtain 2.0 users will now have two options for the 1'' inlet check valve. A new in-line check valve is now available in a plastic
vertical elbow connection. The new in-line check valve can shorten installation time and ease future cleaning. Contained in a verti-
cal adaptor which maintains the protective water column, the quick-connect fittings eliminate two pipe connections, thus shortening
installation or service time. The original brass check valve, as an individual item, part number: 102792 is always available. When
ordering, please specify which check valve is preferred.
Description
Plastic Check Valve Assy
Used only on 10-14" diameter
aertation tanks.
Part Number
104174
(when ordered with IC)
7
Description
Brass Check Valve
Part Number
102792
(when ordered with IC)