Setting up the PostScript driver (Windows)
Saving a custom size
A custom size can be specified and saved in advance as described below.
1
From the "Original Size" and "Output Size" drop-down lists, select
"Custom Size Settings".
The Custom Size Settings dialog box appears.
2
Specify settings for the following:
–
Size: Specify the width and length of the custom size according to
the selected measurement units.
3
Click the [OK] button.
If using long paper, specify the size of the long paper in Custom Size.
For details, refer to "Printing on banner paper" on page 10-119.
cm3521
6
6-9