Oce im5530 Network Fax Manual page 19

This section describes about installing the N/W-Fax driver and Address Book Viewer in an SMB
environment. The N/W-Fax driver can be set up using the same connection as a printer driver
such as Parallel printing, USB printing, LPR printing, IPP printing, and Novell printing. To set up
the N/W-Fax driver using these connections, please refer to the Printing Guide.
Installing from Client Utilities CD-ROM
This section describes how to install the fax client software in an SMB environment which is
available for a local area network using TCP/IP.
To set up the N/W-Fax driver in other connections, please refer to the Printing Guide.
Before installing the printer driver in an SMB environment, confirm the following:
- This equipment is connected to the network and turned on.
- The TCP/IP setting is correct on this equipment and your computer.
Installing the fax client software for SMB connection using the installer
The following describes an installation on Windows XP. The procedure is the same when other
versions of Windows are used.
You must log into Windows as a user who has "Administrators" or "Power Users" privileges
when using the Windows NT 4.0, Windows 2000, Windows XP, or Windows Server 2003.
1
Insert the Client Utilities CD-ROM into the CD-ROM drive.
The installer automatically starts and the Choose Setup Language dialog box
appears.
When the installer does not automatically start, double-click "Setup.exe" in the Client
Utilities CD-ROM.
2
Select your language and click [OK].
The InstallSheild Wizard dialog box appears.
Installing Network Fax Software 17