Installing The Memory - TYAN S7056 User Giude

2.7

Installing the Memory

Before installing memory, ensure that the memory you have is compatible
with the motherboard and processor. Check the TYAN Web site at
http://www.tyan.com
your motherboard.

The Sandy Bridge-EP/EX processor is a quad-channel design with a
total of 4 DDR3 channels

This platform supports Unbuffered DDR3, Registered DDR3, and LR
DIMM (Load Reduced DIMM) DDR3 for buffered memory solutions
demanding higher capacity memory subsystems.

DDR3 data transfer rates of 800, 1066, 1333, and 1600 MT/s are
supported

Each memory channel is 72 or 64 bits wide for ECC or Non-ECC

Both 1.5V and 1.35V DDR3 DIMMs are supported

Gb, 2-Gb, and 4-Gb DDR3 DRAM technologies are supported for
these devices:
— UDIMMs x8, x16
— RDIMMs x4, x8
— LRDIMM x4, x8

Up to 8 ranks are supported per memory channel. DIMMS may be 1,
2 or 4 ranks per module.

All installed memory will automatically be detected. No jumpers or
settings need to be changed for memory detection.

All memory must be of the same type and density.
Unbuffered, and LRDIMM memory types can NOT be mixed and
matched on the same motherboard.
for details of the type of memory recommended for
52
http://www.tyan.com
Registered,