Table of Contents
Advertisement
3.4.2
South Bridge
PCH Information
Name / Stepping
Read only.
SB Chipset Configuration
Restore AC Power Loss
Specify what state to go to when power is re-applied after a power failure (G3 state).
Power Off / Power On / Last State
SLP_S4 Assertion Stretch Enable
Enabled/Disabled SLP_S4# Assertion Stretch.
Enabled / Disabled
SLP_S4 Assertion Width
Select a minimum assertion width of the SLP_S4# signal.
4-5 Seconds / 1-2 Seconds / 2-3 Seconds / 3-4 Seconds
Chassis Intrusion Detection
Enabled: When a chassis open event is detected, the BIOS will display the event.
Disabled / Enabled
104
http://www.tyan.com
Advertisement
Table of Contents
