Lexmark XC2100 Series User Manual page 178

Understanding the printer menus
Use
Color Dropout
Color Dropout
None
Red
Green
Blue
Default Red Threshold
0–255
Default Green Threshold
0–255
Default Blue Threshold
0–255
Contrast
0–5
Best for content
Mirror Image
Off
On
Negative Image
Off
On
Shadow Detail
‑4 to 4
ADF Skew Fix
Auto
Off
On
Scan edge to edge
Off
On
Sharpness
1–5
Temperature
‑4 to 4
Use cc:/bcc:
Off
On
To
Specify which color to drop during scanning, and how much the dropout is increased
or decreased.
Notes:
•
None is the factory default setting for Color Dropout.
• 128 is the factory default setting for each color threshold.
Specify the contrast of the output.
Note: "Best for content" is the factory default setting.
Create a mirror image of the original document.
Note: Off is the factory default setting.
Create a negative image of the original document.
Note: Off is the factory default setting.
Adjust the amount of shadow detail visible on a scanned image.
Note: 0 is the factory default setting.
Correct the slight skew in the scanned image.
Note: Off is the factory default setting.
Allow edge-to-edge scanning of the original document.
Note: Off is the factory default setting.
Adjust the amount of sharpness on a scanned image.
Note: 3 is the factory default setting.
Specify "warm" or "cool" outputs.
Notes:
• 0 is the factory default setting.
•
"Cool" values generate a bluer output than the default while "warm" values
generate a redder output than the default.
Enable the use of the "cc" and "bcc" fields.
Note: Off is the factory default setting.
178