Maintaining The Printer; Cleaning The Printer Parts - Lexmark XC2100 Series User Manual

Maintaining the printer

Maintaining the printer
Warning—Potential Damage: Failure to maintain the printer, or to replace parts and supplies, may cause damage to
your printer or printer performance problems.

Cleaning the printer parts

Cleaning the printer
Note: You may need to perform this task after every few months.
Warning—Potential Damage: Damage to the printer caused by improper handling is not covered by the printer
warranty.
1
Make sure that the printer is turned off and unplugged from the electrical outlet.
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock when cleaning the exterior of the printer,
unplug the power cord from the electrical outlet and disconnect all cables from the printer before
proceeding.
2
Remove paper from the standard bin, multipurpose feeder, and manual feeder.
3
Remove any dust, lint, and pieces of paper around the printer using a soft brush or vacuum.
4
Dampen a clean, lint-free cloth with water, and use it to wipe the outside of the printer.
Warning—Potential Damage: Do not use household cleaners or detergents, as they may damage the finish of
the printer.
5
Make sure all areas of the printer are dry before sending a new print job.
214