User-Friendly Design; Continuous Recording; Repeat Playback - JVC GY-DV5000U Quick Manual

BR-DV3000U (NTSC) DV Recorder
BR-DV3000E (PAL) DV Recorder
The BR-DV3000 is a simple, no-frills recorder/player with a compact and stylish design that can be
installed horizontally or vertically.
System flexibility with various interfaces
NTSC/PAL compatibility
Switch between NTSC or PAL as required. This makes it easy
to work with internationally sourced material and transfer it to a
non-linear system for editing. You can also record to Standard
DV or Mini DV tape in either NTSC or PAL system.
*Cannot be used as an NTSC/PAL converter.
The BR-DV3000 can record and play back signals in both NTSC and PAL formats.
Y/C input/output and composite
input/output
In addition to DV input/output, the BR-DV3000 is equipped
with the Y/C input/output and composite input/output.
RS-422A interface
As the BR-DV3000 is equipped with an industry-standard
RS-422A interface, DV source material can be transferred to a
variety of formats for editing.
*The BR-DV3000 can be used as a player when connected to the RM-G820. It cannot be used as a recorder.
DVCAM playback capability
DVCAM recordings can be played back directly on the
BR-DV3000. This makes it easy to use DVCAM recordings as
source material for editing.
Application
Non-linear editing system
Materials recorded on a Standard or Mini DV tape can be
transferred to the non-linear system via the DV interface.
After you finished the editing on your non-linear system,
signals can be directly transferred to this VTR for archiving.
OPERATE
EJECT
MLNU
A.DUB REC PLAY PAUSE
DVCAM NTSC PAL REC INH.
CH-1/3 SET
MIC REMOTE SEL. INPUT SEL. REW STOP FF
SERIAL SERIAL CH-2/4
9PIN WIRELESS DV Y/C
BR-DV3000
VIDEO CASSETTE RECORDER
BR-DV3000
7
Monitor
Non-linear editing system

User-friendly design

Audio indicator
This indicator lights whenever audio signals are input. Also, it provides a convenient
way to check for the presence of the audio signals during tape playback.
Wireless/wired remote control
Connecting the optional RM-G30 controller to the REMOTE connector
enables you to control BR-DV3000 operations from a distance. There's
also a wireless remote control that provides control over field advance
(1st/2nd), frame advance, menu display, audio reference level selection
(-20 dB or -12 dB, in the Playback mode only), color bar display and
blank search, as well as in addition to basic operations.
Wireless remote control (provided)
20x high-speed time code search/blank search
The built-in time code generator provides preset (rec run) and regene time codes.
In combination with the 20x search function (100x max. in the FF or REW mode),
this provides super-fast access to any target point on the tape with visible pictures.

Continuous recording

OPERATE
DV-cable
A.DUB
DVCAM NTSC PAL REC INH.
CH-1/3
MIC REMOTE SEL. INPUT SEL.
SERIAL SERIAL CH-2/4
9PIN WIRELESS DV Y/C
BR-DV3000
VIDEO CASSETTE RECORDER
GY-DV300 BR-DV3000
This enables continuous shooting for extended periods with no breaks in the
recording.

Repeat playback

When the video signal ends or tape ends, playback starts again from the beginning
of the recorded video or tape (video end repeat/tape end repeat).
Vertical operation
The new tape mechanism is compatible with either vertical
or horizontal operation, making it easy to install the compact
BR-DV3000 in a narrow space or close to a non-linear
system.
On-screen menu
Systematic, easy-to-understand menu screens simplify
setting and operation procedures. Menu setting can be
done using either the buttons on the front panel or the
wireless remote control.
When a camcorder is connected to the
BR-DV3000 via the DV connector, the
EJECT
MLNU
REC PLAY PAUSE
SET
REW STOP FF
BR-DV3000 will start recording 5 minutes
before the tape in the camcorder ends.