3. S
ETUP
AC Power
Power Linking
This product provides power linking via the Edison outlet located in the back of the
unit. Please see the diagram below for further explanation.
Power Linking
Diagram
You can power link up to 14 Scorpion™ GVC/RVM/RGY products on 120 VAC or
up to 28 Scorpion™ GVC/RVM/RGY products on 230 VAC.
The power linking diagram shown above corresponds to the North American
version of this product ONLY! If using this product in other markets, you must
consult with the local CHAUVET® distributor, as power linking connectors and
requirements may differ in your country or region.
Scorpion™ GVC/RVM/RGY User Manual (Rev. 08)
This product has an auto-ranging power supply and can work with an input voltage
range of 100~240 VAC, 50/60 Hz.
To determine the power requirements for a particular product, see the label affixed to
the back plate of the product or refer to the product's specifications chart. A product's
listed current rating indicates its average current draw under normal conditions.
Always connect this product to a protected circuit (circuit breaker or fuse).
Make sure that it has an appropriate electrical ground to avoid the risk of
electrocution or fire.
Never connect this product to a rheostat (variable resistor) or dimmer circuit,
even if the rheostat or dimmer channel serves only as a 0 to 100% switch.
To other
products
st
1
Product
nd
2
Product
rd
3
Product
Page 11 of 26