Operation; Control Panel Operation; Menu Branches; Changing Options On The Current Menu Branch - Chauvet Scorpion GVC User Manual

4. O
PERATION

Control Panel Operation

To access the control panel functions, use the four buttons located underneath the
display.

Menu Branches

The menu structure of the Scorpion™ GVC/RVM/RGY products has seven branches,
as follows:










Changing Options on the Current Menu Branch

To change an option on the same menu branch, do the following:

Changing Options on a Different Menu Branch

To change an option on a different menu branch, you must exit the current branch.
Page 14 of 26
Button Function
Press to find an operation mode or
<MENU> to back out of the current menu
option
Press to scroll down the list of
<DOWN>
options or to find a lower value
Press to scroll up the list of options
<UP>
or to find a higher value
Press to activate a menu option or a
<ENT>
selected value
Auto/Sound (13 option)
Laser Sky Color (4 options)
Laser Sky Effect (1 option)
Sound Sensitivity (10 options)
DMX address (503 options)
Slave (1 option)
Reverse (2 options with two values each)
The control panel will remember the last setting you programmed, even
after you have turned the product off.
In addition, the control panel will remember the last selected option from
each menu branch.
1. Press <MENU> once (the LED display will blink).
2. Press <UP> or <DOWN> until the desired menu option shows on the LED
display.
3. Press <ENT> to accept the new option (the new option will show solid on the
LED display).
1. Press <MENU> once (the LED display will blink).
2. Press <MENU> repeatedly until seeing the active option of the desired menu
branch.
3. Press <UP> or <DOWN> until the desired menu option within the new menu
branch shows on the LED display.
4. Press <ENT> to accept the new option (the new option will show solid on the
LED display).
Scorpion™ GVC/RVM/RGY User Manual (Rev. 08)