Automatic Mode
To enable the Automatic mode, follow the instructions below:
Laser Sky Color Mode
To enable the Laser Sky Color mode, follow the instructions below:
Laser Sky Effect Mode
To enable the Laser Sky Effect mode, follow the instructions below:
Reverse Motion
To reverse the direction of the pan and tilt motion, follow the instructions below:
Scorpion™ GVC/RVM/RGY User Manual (Rev. 08)
1.
Press <MENU> repeatedly until the active option of the Auto/Sound branch
(AF1 to rdM) shows blinking on the display.
2.
Use <UP> or <DOWN> to select an automatic program (AF1~ASM).
3.
Press <ENT> (the new auto program will show solid on the display).
1.
Press <MENU> repeatedly until the active option of the Laser Sky Color
branch (LS1 to LSS) shows blinking on the display.
2.
Use <UP> or <DOWN> to select a laser sky color option (LS1~LSS).
3.
Press <ENT> (the new laser sky color will show solid on the display).
1.
Press <MENU> repeatedly until LSU shows blinking on the display.
2.
Use <UP> or <DOWN> to change the angle of the laser sky effect.
3.
Press <ENT> (LSU will show solid on the display).
1.
Press <MENU> repeatedly until rEv shows blinking on the display.
2.
Press <ENT> (the current option for pan direction will show (P-n or P-Y).
a) To change the setting, use <UP> or <DOWN> and continue to step "3".
b) To keep the setting, continue to step "3".
3.
Press <ENT> (the current option for tilt direction will show (t-n or t-Y).
a) To change the setting, use <UP> or <DOWN> and continue to step "4".
b) To keep the setting, continue to step "4".
4.
Press <ENT> (the current software version will show briefly on the display,
followed by rEv).
Page 17 of 26