H8DMT/H8DMT-IBX/H8DMT-F/H8DMT-IBXF User's Manual
Support
The H8DMT/H8DMT-IBX/H8DMT-F/H8DMT-IBXF Serverboards support single or
dual-channel, DDR2-800/667/533 registered ECC SDRAM.
Only interleaved memory is supported, so you must populate two DIMM slots at a time.
Populating two adjacent slots at a time with memory modules of the same size and type
will result in interleaved (128-bit) memory, which is faster than non-interleaved (64-bit)
memory.
Maximum Memory
For the latest information on the maximum memory for the H8DMT serverboard, please
visit the
http://www.supermicro.com
2-5
I/O Port and Control Panel Connections
The I/O ports are color coded in conformance with the PC99 specification to make
setting up your system easier. See
various I/O ports.
Figure 2-7. I/O Port Locations and Definitions
Dedicated
LAN Port
LAN1
USB 0/1
Ports
NOTE: The InfiniBand port is only available for the H8DMT-IBX/H8DMT-IBXF
serverboards.
NOTE: The dedicated LAN port above the USB ports is only present for
H8DMT-F/H8DMT-IBXFserverboards.
web site.
Figure 2-7
LAN2
COM1 Port
(Turquoise)
below for the colors and locations of the
VGA Port
(Blue)
2-6
InfiniBand
Port