Table of Contents
Advertisement
NIC2 (LAN2) LED
The LED connections for LAN2 are on pins 9 and 10 of JF1. Attach LAN LED cables to
display network activity. See the table below for pin definitions.
NIC1 (LAN1) LED
The LED connections for LAN1 are on pins 11 and 12 of JF1. Attach LAN LED cables to
display network activity. See the table below for pin definitions.
HDD LED
The HDD LED connection is located on pins 13 and 14 of JF1. Attach the hard drive
LED cable here to display disk activity (for any hard drives on the system, including
SAS, Serial ATA and IDE). See the table below for pin definitions
Power On LED
The Power On LED connector is located on pins 15 and 16 of JF1. This connection is
used to provide LED indication of power being supplied to the system. See the table
below for pin definitions.
State
Indication
Solid
Overheat
Blinking
Fan Fail
Pin#
Definition
9
Vcc
10
NIC2
Pin#
Definition
11
Vcc
12
NIC1
Pin#
Definition
13
Vcc
14
HD Active
Pin#
Definition
15
5V Stby
16
Control
2-9
Chapter 2: Installation
Advertisement
Table of Contents
