Fujitsu PRIMEQUEST 2000 Series Design Manual page 65

3.2.2 Functions That are Used for Partition Configuration - Reserved SB (2/6)
Wait Time for Reserved SB Switching
n
From 0 to 99 minutes can be set for the shutdown wait time when a Reserved SB
that is used in another partition is switched by using the MMB Web-UI (the
default setting is 10 minutes).
If the partition cannot be shut down after a specified time is passed, the
Reserved SB is forced to be activated.
Save of Partition Configuration Information
n
Before Reserved SB switching is performed, the partition configuration
information for the entire cabinet is automatically saved to the MMB.
• The partition configuration information for the last time a Reserved SB was
operated is saved.
• The saved information can be viewed from the MMB Web-UI.
PRIMEQUEST 2000 Series Design Guide 64 Copyright 2014 FUJITSU LIMITED