Fujitsu PRIMEQUEST 2000 Series Design Manual page 63

3.2.2 Functions That are Used for Partition Configuration - Home SB
Home SB
n
The main SB among the SBs that are used to configure a PPAR block.
Functions That Are Enabled on the Home SB
n
•PCH
Onboard I/O is enabled, and USB ports and a VGA port can be used only on the
Home SB.
•Reference clock source
The clock source of the Home SB becomes the clock source in the partition.
Selection of the Home SB
n
Specify the Home SB by using the MMB Web-UI.
If the Home SB is not specified directly, the first SB that is incorporated in the
partition is specified as the Home SB.
* If the Home SB is removed from the partition or is degraded, the SB with the lowest
number in the partition is specified as the Home SB.
PRIMEQUEST 2000 Series Design Guide 62 Copyright 2014 FUJITSU LIMITED