Erasing The Locally Defined Settings; Erasing The Locally Defined Network Settings - Cisco SIP IP Phone Administrator's Manual

Chapter 3 Managing Cisco SIP IP Phones
The following is a sample configuration for a relative DST configuration:
; sip default configuration file
(additional configuration text omitted)
time_zone : PST
dst_offset : 01/00
dst_start_month : April
dst_start_day : 0
dst_start_day_of_week : Sunday
dst_start_week_of_month : 1
dst_start_time : 02/00
dst_stop_month : October
dst_stop_day : 0
dst_stop_day_of_week : Sunday
dst_stop_week_of_month : 8
dst_stop_time : 02/00
dst_stop_autoadjust : 1
(additional configuration text omitted)

Erasing the Locally Defined Settings

You can erase the locally defined network settings and the SIP settings that have been configured in the
phone.

Erasing the Locally Defined Network Settings

When you erase the locally defined settings, the values are reset to the defaults.
Before You Begin
•
•
•
Step 1 Press the settings key. The Settings menu appears.
Highlight Network Configuration.
Step 2
Press the Select soft key. The Network Configuration settings are displayed.
Step 3
Highlight Erase Configuration.
Step 4
Press the Yes soft key.
Step 5
Press the Save soft key. The phone programs the new information into Flash memory and resets.
Step 6
Unlock configuration mode as described in the
page 3-2.
If DHCP has been disabled on a phone, clearing the phone's settings reenables it.
Select the Erase Config parameter by pressing the down arrow to scroll to and highlight the
parameter or by pressing the number that represents the parameter (located to the left of the
parameter name on the LCD).
Erasing the Locally Defined Settings
"Unlocking Configuration Mode" section on
Cisco SIP IP Phone Administrator Guide
3-41