Cisco SIP IP Phone Administrator's Manual page 76

Modifying the Phone's SIP Settings
For all variables, x is a number 1 through 6.
Note
Table 3-4 Phone-Specific Configuration Parameters
Parameter Required or Optional
linex_name Required
linex_shortname Optional
linex_authname Required for line 1 when
registration is enabled and
the proxy server requires
authentication
linex_password Required for line 1 when
registration is enabled and
the proxy server requires
authentication
linex_displayname Optional
Cisco SIP IP Phone Administrator Guide
3-24
Description
Number or e-mail address used when registering. When entering a number,
enter the number without any dashes. For example, enter 555-1212 as
5551212. When entering an e-mail address, enter the e-mail ID without the
host name.
Name or number associated with the linex_name as you want it to display
on the phone's LCD if the linex_name length exceeds the allowable space
in the display area. For example, if the linex_name value is the phone
number 111-222-333-4444, you can specify 34444 for this parameter to
have 3444 display on the LCD instead. Alternatively, if the value for the
linex_name parameter is the e-mail address "username@company.com",
you can specify the "username" to have just the user name appear on the
LCD instead.
This parameter is used for display only. If a value is not specified for this
parameter, the value in the linex_name variable is displayed.
Name used by the phone for authentication if a registration is challenged
by the proxy server during initialization. If a value is not configured for
the linex_authname parameter for a line when registration is enabled, the
value defined for line 1 is used. If a value is not defined for line 1, the
default line1_authname is UNPROVISIONED.
Password used by the phone for authentication if a registration is
challenged by the proxy server during initialization. If a value is not
configured for the linex_password parameter for a line when registration
is enabled, the value defined for line 1 is used. If a value is not defined for
line 1, the default line1_password is UNPROVISIONED.
Identification as it should appear for caller identification purposes. For
example, instead of jdoe@company.com appearing on phones that have
caller ID, you can specify John Doe in this parameter to have John Doe
appear on the callee end instead. If a value is not specified for this
parameter, nothing is used.
Chapter 3 Managing Cisco SIP IP Phones