How To Change The Speed Graphic Format - Furuno DS-60 Operator's Manual

4.4

How to Change the Speed Graphic Format

The default speed graphic has the zero point for the ahead and astern speedometers
on the left side of the display, and the pointer moves rightward with increase in ahead
speed. If desired, you can reverse that arrangement.
This setting also changes the position of the direction indicators on the digital speed
displays. See section 5.5.
1. Press the MENU/ESC key to open the menu.
2. Select [Scale Set Up] then press the ENT key.
3. Select [SYM Location] then press the ENT key.
4. Select [Left] or [Right] then press the ENT key.
[Left]: The pointer moves rightward with increase in ahead speed, and the zero
point for the speedometers is on the left.
[Right]: The pointer moves leftward with increase in ahead speed, and the zero
point for the speedometers is on the right.
5. Press the DISP key to close the menu.
4. SPEED GRAPHIC DISPLAY
SYM Location "Left"
SYM Location "Right"
4-5