How To Adjust The Screen Brilliance; How To Select A Display - Furuno DS-60 Operator's Manual

1.3

How to Adjust the Screen Brilliance

You can adjust the brilliance of the display screen from the display unit and the
Dimmer Controller, in 10 levels including off. Press
press to decrease the brilliance. To quickly change the brilliance, press and hold
related arrow.
If the Remote Display RD-50 (sub display unit) is connected to the display unit of the
DS-60 in a daisy chain, their brilliances are mutually adjusted when you adjust the bril-
liance from the DS-60.
1.4

How to Select a Display

Press the DISP key to select a display. In the default arrangement there are four dis-
plays: navigation data, berthing (head-up), heading and speed, and trip distance and
total distance.
A maximum of seven displays are available, in full screen or two-way horizontal split
screen. Section 5.1 shows you to set the displays to meet your requirements.
When a data is lost, hyphens; for example, "- -.-", replace the lost data. When a data
is in error, its unit (kn, etc.) is shown in white characters on a red background. The
"normal" unit appears again when the data returns.
Navigation data display
Heading, speed data display
56.0
56.0
Berthing display (head-up)
Trip distance, total distance run display
Default displays
1. INTRODUCTION
to increase the brilliance, or
1-5