Navigation Data Display; Navigation Data Display Overview - Furuno DS-60 Operator's Manual

2.

NAVIGATION DATA DISPLAY

2.1

Navigation Data Display Overview

The navigation data display provides comprehensive navigation data (with connection
of related sensors) and a 3-axis speed display. When a data is lost, its numerical indi-
cation is shown with hyphens; for example, "---.-". When a data is in error, its unit; for
example, "kn," is shown in white characters on a red background. The "normal" unit
appears again when the data returns.
The 3-axis speed display mainly shows transverse speed at the reference point, lon-
gitudinal speed and transverse speed at the stern. The direction indicators can be
shown with arrows or text, selectable from the menu. Wind angle, drift angle and cur-
rent (tide) direction are indicated with purple, brown and blue triangles, respectively.
Heading
Doppler sonar
measured
SOG(STW), COG
Current (tide)
speed, direction
Wind reference,
speed,
angle
Message area
1) Transverse speed at
reference point
2) Longitudinal speed
3) Transverse speed at stern
(Requires rate-of-turn gyro
or gyrocompass. If no
connection, same as 1).
Tracking mode
SOG: Speed over the ground
STW: Speed through the water
Position
1)
*
2)
*
3)
*
3-axis speed display
Tracking mode monitor, tracking mode
Time
(See section 1.5 for description.)
56.0
56.0
Wind angle marker (purple)
Drift angle marker (brown)
Current (tide) direction marker (blue)
*
Direction shown with arrows or text,
selectable from the menu.
*
(green) (red)
ROT source,
ROT
GPS-measured
SOG, COG
Depth source,
depth (from transducer)
Drift angle
Trip distance,
Total distance run
(black) (red)
2-1