Table of Contents
Advertisement
b) grill burner
– Unscrew and remove the burner
securing screw 'C' (fig. 8.9).
– Slacken screw 'D' (fig. 8.9).
– Move the burner in the manner shown
in figure 8.10.
Take care not to damage the wire to
the safety valve probe.
– Using a 10 mm box spanner, unscrew
the injector (indicated by the arrow in
fig. 8.10) and replace with a new injec-
tor selected in accordance with the
" TABLE FOR THE CHOICE OF THE
INJECTORS "; then replace the burner
repeating the above steps in reverse
order.
Fig. 8.9
C
Fig. 8.10
D
31
Advertisement
Table of Contents
