Setting The Unit; To Use The Basic Cradle / Satellite Cradle On A Desktop (Example: Satellite Cradle; To Hang The Basic Cradle / Satellite Cradle On A Wall (Example: Satellite Cradle - Casio DT-900 Operation Manual

Setting the Unit

The following describes how to set up the Basic Cradle, Satellite Cradle and Charger Unit.
You can set up these three types in one of two ways, on a wall or on a desktop.
To use the Basic Cradle / Satellite Cradle on a desktop
(example: Satellite Cradle)
1
Simply place the Satellite Cradle on a desk,
table, or any other flat, stable surface, rubber
feet down. You can even use the wood
screws to anchor the base onto a horizontal
surface. If you do not anchor the base, make
sure you locate the Satellite Cradle where
there is no danger of it falling. The nose guide
is needed when you are using the forward-
facing reader port model.
To hang the Basic Cradle / Satellite Cradle on a wall
(example: Satellite Cradle)
1
Attach the wall unit screw.
When you are using the down-facing reader
port model, remove the nose guide attached
to the Data Collector, and attach the wall unit
screw to A using the screws (supplied).
When you are using the forward-facing reader
port model, attach the wall unit screw to B
using the screws (supplied) with the nose
guide still attached.
Down-facing
reader port model
Forward-facing
reader port model
A
B
CA
L
D
P
H
P
E-53