Casio DT-900 Operation Manual page 46

Using the Charger Unit
1 AC adaptor jack
2 Nose Guide
3 Data Collector detection switch Detects whether or not the Data Collector is mounted correctly on
4 Battery pack charge indicator
5 Charge indicator
6 Power indicator
7 Installation covers (L, R)
8 Charge/Power supply terminals Supplies power to the Data Collector mounted on the Charger
9 Battery pack charge terminals
10 Power switch
11 Base
12 Wall mounting hole
E-48
For connection of the AC adaptor to supply power
Remove this guide when you are using the down-facing reader
port model.
the Charger Unit.
Indicates the charge status of the spare battery pack.
Off: Not charging, or a battery pack problem
Lit Red: Charging (charging standing by when the battery in the
Data Collector is charging)
Lit Green: Charging complete
Indicates the charge status of the lithium-ion battery pack in the
Data Collector.
Off: Not charging (e.g. lithium-ion battery not loaded in Data
Collector) or a battery pack problem
Lit Red: Charging
Lit Green: Charging complete
Indicates whether power is ON or OFF, and if the Data Collector is
mounted.
Off: Power OFF
Lit Red: Power ON, Data Collector not mounted
Lit Green: Power ON, Data Collector mounted
Hold down the charge/power supply terminals when the Charger
Unit is used as an installed type.
Unit.
Charges the spare battery pack separately.
Turns power ON and OFF.
Reverses the position of the base when wall-mounting the Charger
Unit.
Use this hole to attach the Charger Unit to a hook on a wall.