When You Are Using The Down-Facing Reader Port Model - Casio DT-900 Operation Manual

Using the Basic Cradle

When You Are Using the Down-facing Reader Port Model

When you are using a down-facing reader port model, remove the nose guide before use.
To remove the nose guide, remove the two
screws using a screwdriver.
Setting up the Communication Unit and Connecting
the Data Collector
Use only the specified AC Adaptor for Communication Unit to connect to an electrical outlet.
Be sure to connect the AC adaptor and turn on Communication Unit power before
performing any data communication operation with the Data Collector. Power is supplied to
the Data Collector by the Communication Unit.
1
Plug the AC adaptor into an electrical outlet.
2
After making sure that the power switch of the
Communication Unit is in the OFF position,
plug the other end of the AC adaptor into the
AC terminal at the top of the Communication
Unit.
3
After making sure that the power of the
Communication Unit and personal computer
is OFF, remove the cover and connect one
end of the optional RS-232C cable (DT-
782RSC, DT-783RSC, DT-787AX) to the RS-
232C connector at the top of the
Communication Unit. Connect the other end
of the cable to the computer's RS-232C
connector. When the RS-232C connector is
not used, attach the cover.
E-34
To electrical outlet
Power
switch (OFF)