Casio DT-900 Operation Manual page 37

1 RS-232C Interface
2 RS-422 Interface
3 AC adaptor jack
4 Nose Guide
5 Data Collector detection switch Detects whether or not the Data Collector is mounted correctly on
6 System operation indicator
A system operation problem is indicated when this indicator does not light up green shortly after the
7 Data communication indicator
8 Battery pack charge indicator
9 Charge indicator
10 Power indicator
11 Installation covers (L, R)
12 Charge/Power supply terminals Supplies power to the Data Collector mounted on the Satellite
13 Battery pack charge terminals
14 Infrared port
15 Power switch
16 Base
17 DIP switches
18 Wall mounting hole
For connection to a PC and uploading/downloading of system data
and file data.
For connection of multiple Optional Satellite Cradles.
For connection of the AC adaptor to supply power.
Remove this guide when you are using the down-facing reader port model.
the Satellite Cradle.
Indicates whether or not system operation is normal.
Data Collector is mounted onto the Satellite Cradle.
Off: All Data Collectors mounted on the Satellite Cradle are
unable to communicate, or there is a system problem.
Lit Green: Normal system operation. One or more of the Data
Collectors mounted on the Satellite Cradles are
communicating.
Indicates the status of data communication operations.
Off:
Flashing Green:
Lit Red:
Indicates the charge status of the spare battery pack.
Off: Not charging, or a battery pack problem
Lit Red: Charging (charging standing by when the battery in the
Data Collector is charging)
Lit Green: Charging complete
Indicates the charge status of the lithium-ion battery pack in the
Data Collector.
Off: Not charging (e.g. lithium-ion battery not loaded in Data
Collector) or a battery pack problem
Lit Red: Charging
Lit Green: Charging complete
Indicates whether power is ON or OFF, and if the Data Collector is
mounted.
Off: Power OFF
Lit Red: Power ON, Data Collector not mounted
Lit Green: Power ON, Data Collector mounted
Hold down the charge/power supply terminals when the Satellite
Cradle is used as an installed type.
Cradle.
Charges the spare battery pack separately.
This port provides contact-less infrared communication capabilities
with a Data Collector.
Turns power ON and OFF.
Reverses the position of the base when wall-mounting the Satellite
Cradle.
Use these switches to set the operational configuration of the
Satellite Cradle.
Use this hole to attach the Satellite Cradle to a hook on a wall.
Not communicating
Communication in progress
Optional Communication Unit
connection problem
E-39