Loading And Removing The Lithium-Ion Battery Pack - Casio DT-900 Operation Manual

Loading and Removing the Lithium-ion Battery Pack

Loading the Lithium-ion Battery Pack
1
Slide the main battery compartment cover
lock to the FREE position and remove the
cover.
If the main battery compartment cover does
not open, lift up tab "a" with your fingernail or
a thin object.
2
Load a lithium-ion battery pack into the main
battery compartment in the direction shown in
the figure.
Load the battery while sliding it in with the ▲
mark on the lithium-ion battery pack aligned
with the ▼ mark on the Data Collector body.
3
Attach the battery compartment cover to the
Data Collector and slide the main battery
compartment cover lock to the LOCK position.
Removing the Lithium-ion Battery Pack
Remove the lithium-ion battery pack following the loading procedure in reverse.
Be sure to turn the Data Collector OFF before you do this.
a
E-19