To Send Data From The Host Unit To The Terminal Unit - Casio PV-750 Plus User Manual

3. Use an optional SB-90 9-9 pin connector to connect the two cradles to
each other.
Host unit
• All data communication settings must be made on only one of the PV
Units only. This unit is called the host unit, while the other unit is called
the terminal unit.

To send data from the host unit to the terminal unit

1. After connecting the two PV Units, turn on the host unit.
• Terminal unit power should still be off at this time.
2. Display the list view in a mode whose data can be sent with this setup.
• This configuration supports transfer of Contacts (Business, Personal,
Untitled 1-3, Phone Book (Phone), Phone Book (SIM)), Memo (Untitled
1-5), Schedule, To Do, Reminder, Expense Manager, and Quick-Memo
data.
136
Terminal unit
Start button
Cradles
SB-90 9-9 pin connector