To Receive Data From The Terminal Unit On The Host Unit - Casio PV-750 Plus Communications Manual

To receive data from the terminal unit on the host unit

1. Perform steps 1 through 4 under "To send data from the host unit to the
terminal unit".
2. Tap the button next to Receive.
3. Tap Set.
4. Tap the check boxes to specify the data you want to receive (checked)
and the data you do not want to receive (unchecked).
5. After everything is the way you want it, tap Set.
6. Turn on the power of the terminal unit and then press the Start button
on its cradle to start the data transfer operation.
138