Table of Contents
Advertisement
156999670en.qxp
3/6/2006
IMPORTANT!
Top up the rinse aid when the light on the
control panel illuminates.
CAUTION!
Never fill the rinse aid dispenser with any other
substances (e.g. dishwasher cleaning agent,
liquid detergent). This would damage the
appliance.
Adjusting the dosage of rinse aid
Increase the dose if there are drops of water or
lime spots on the dishes after washing.
Loading cutlery and dishes
The following items are not suitable for use
●
in the dishwasher:
- Cutlery with wooden, horn, china or
mother-of-pearl handles
- Plastic items that are not heat resistant
- Older cutlery with glued parts that are not
temperature resistant
- Bonded cutlery items or dishes
- Pewter or copper items
- Lead crystal glass
- Steel items prone to rusting
10
2:10 PM
Pagina 10
Open the lid.
Set the dosage level.
(The dose is factory set
in position 4).
●
Reduce the dose if there are whitish streaks
on the dishes or a bluish film on glassware or
knife blades.
Close the lid and press
until it locks.
- Wooden platters
- Items made from synthetic fibres
When loading the dishwasher, make sure
that you:
- Remove all left over food and debris.
- Soften remnants of burnt food in pans
- Load hollow items such as cups, glasses,
pans, etc. with the opening downwards so
that water cannot collect in the container
or a deep base.
Dishes and items of cutlery must not lie
-
inside one another, or cover each other.
Hide quick links:
Advertisement
Table of Contents
