Zanussi ZDF 221 User Manual page 8

156999670en.qxp 3/6/2006
Setting the water softener electronically (see table)
The water softener is factory set at position 5.
The dishwasher must
be switched off
The end of programme
indicator light might
flash 5 times, for
example. The flashing is
repeated every 5
seconds.
8
2:10 PM Pagina 8
Press and hold the start/cancel button and turn the
programme selector dial clockwise till the first
programme. Keep the button pressed until the
programme selector indicator light and the
start/cancel indicator light start flashing.
To change the level, The end of programme
press the start/cancel indicator light indicates
button. Each time the the new setting.
button is pressed the
level increases. (Level 1
follows level 10).
Release the button. The
end of programme
indicator light will flash.
The number of flashes
corresponds to current
level set.
To memorise the
operation, turn the
programme selector dial
to position off.