Table of Contents
Advertisement
117995910en.qxp
25/07/2006
Top up the rinse aid
when the indicator (B)
becomes clear.
Adjusting the dosage of rinse aid
Increase the dose if there are drops of water or
lime spots on the dishes after washing.
Loading cutlery and dishes
The following items are not suitable for use
●
in the dishwasher:
- Cutlery with wooden, horn, china or
mother-of-pearl handles
- Plastic items that are not heat resistant
- Older cutlery with glued parts that are not
temperature resistant
- Bonded cutlery items or dishes
- Pewter or copper items
- Lead crystal glass
- Steel items prone to rusting
10
8.57
Page 10
CAUTION!
Never fill the rinse aid dispenser with any other
substances (e.g. dishwasher cleaning agent, liquid
detergent). This would damage the appliance.
Open the lid.
Set the dosage level.
(The dose is factory set
in position 4).
●
Reduce the dose if there are whitish streaks
on the dishes or a bluish film on glassware or
knife blades.
Close the lid and press
until it locks.
- Wooden platters
- Items made from synthetic fibres
When loading the dishwasher, make sure
that you:
- Remove all left over food and debris.
- Soften remnants of burnt food in pans
- Load hollow items such as cups, glasses,
pans, etc. with the opening downwards so
that water cannot collect in the container
or a deep base.
Dishes and items of cutlery must not lie
-
inside one another, or cover each other.
Hide quick links:
Advertisement
Table of Contents
