General Operating Instructions; Switching On/Off The Device - Medion Navigation Unit Operating Instructions Manual

General Operating Instructions

Switching On/Off the Device

Your device will be in its normal operating state after the initial setting up. You can activate
and deactivate your device with the On-/Off switch.
1. To start your navigation system press briefly the On-/Off switch
Note
Your device is delivered in a state in which it will not switch off itself auto-
matically, when it is switched on and not being used. You can adjust the
operating time of your device to your requirements by means of the
Settings button on the main screen.
Your navigation system will use a low amount of electricity and the batter-
ies will be discharged, even when it is in the standby mode.
2. To switch off your navigation system press briefly the On-/Off switch
mode):
You have three possible choices now here:
Button Description
Cancel/Back
Return to previous view with this key, if you have accidently called
up this screen.
Standby Mode
The device will go into Standby Mode if this key is clicked.
Reset
You will carry out a Reset by clicking this key.
General Operating Instructions
.
. (standby
21