4. The welcome text will be displayed in the text entry box. Click on the
in order to continue with entering the fingerprints. The following display will ap-
pear:
5. Now, draw the finger previously selected (fingertip) across the sensor on the upper
surface of the device three times slowly and horizontally within a few seconds.
The
symbol will appear after this has been done successfully
6. Confirm with
Note
The
non-recognition of the fingerprint. Repeat Point 4. Click on
The fingerprint stored will appear in the overview:
28
.
symbol will appear in the case of incorrect execution or the
English
symbol,
to do this
Need help?
Do you have a question about the Navigation Unit and is the answer not in the manual?